HP 3600 v2 Series Configuration Guide

82
Step Command Remarks
2. Configure EAP relay or
EAP termination.
dot1x authentication-method
{ chap | eap | pap }
Optional.
By default, the network access device
performs EAP termination and uses CHAP to
communicate with the RADIUS server.
Specify the eap keyword to enable EAP
relay.
Specify the chap or pap keyword to enable
CHAP-enabled or PAP-enabled EAP
termination.
NOTE:
If EAP relay mode is used, the user-name-format command configured in RADIUS scheme view does no
t
take effect. The access device sends the authentication data from the client to the server without any
modification.
Setting the port authorization state
The port authorization state determines whether the client is granted access to the network. You can
control the authorization state of a port by using the dot1x port-control command and the following
keywords:
• authorized-force—Places the port in the authorized state, enabling users on the port to access the
network without authentication.
• unauthorized-force—Places the port in the unauthorized state, denying any access requests from
users on the port.
• auto—Places the port initially in the unauthorized state to allow only EAPOL packets to pass, and
after a user passes authentication, sets the port in the authorized state to allow access to the network.
You can use this option in most scenarios.
You can set authorization state for one port in Ethernet interface view, or for multiple ports in system view.
If different authorization state is set for a port in system view and Ethernet interface view, the one set later
takes effect.
To set the authorization state of a port:
Step Command Remarks
1. Enter system view. system-view N/A
2. Set the port
authorization state.
• In system view:
dot1x port-control { authorized-force | auto
| unauthorized-force } [ interface
interface-list ]
• In Ethernet interface view:
a. interface interface-type
interface-number
b. dot1x port-control { authorized-force |
auto | unauthorized-force }
Optional.
Use either method.
By default, auto applies.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English