219
Configuring a user profile
Overview
A user profile provides a configuration template to save predefined configurations, such as a Quality of
Service (QoS) policy.
The user profile implements service applications on a per-user basis. Every time a user accesses the
device, the device automatically applies the configurations in the user profile that is associated only with
this user.
User-based traffic policing is more flexible than interface-based traffic policing. In interface-based traffic
policing, if a user moves between ports to access a device, you must remove the policy from the previous
port and then configure the same policy on the port being used to restrict user behaviors. The
configuration task is tedious and error prone.
The user profile supports working with 802.1X and portal authentications and restricts authenticated
users' behaviors as follows:
1. After the authentication server verifies a user, the server sends the device the name of the user
profile associated with the user.
{ If the profile is enabled, the device applies the configurations in the user profile, and allows user
access based on all valid configurations.
{ If the user profile is disabled, the device denies the user access.
2. After the user logs out, the device automatically disables the configurations in the user profile, and
the restrictions on the user access are removed.
User profile configuration task list
Task Remarks
Creating a user profile Required
Applying a QoS policy Required
Enabling a user profile Required
Creating a user profile
Before you create a user profile, complete the following tasks:
• Configure authentication parameters on the device.
• Perform configurations on the client, the device, and the authentication server, for example,
username, password, authentication scheme, domain, and binding a user profile with a user.
To create a user profile:
To Next Page
Loading...
Need help?
General