HP 3600 v2 Series Configuration Guide

310
Ste
p
Command Remarks
2. Enter public key view. public-key peer keyname N/A
3. Enter public key code view.
public-key-code begin N/A
4. Configure a client's host
public key.
Enter the content of the host public
key
Spaces and carriage returns are
allowed between characters.
5. Return to public key view and
save the configured host
public key.
public-key-code end
When you exit public key code
view, the system automatically
saves the public key.
6. Return to system view.
peer-public-key end N/A
Importing a client public key from a public key file
Ste
p
Command
1. Enter system view.
system-view
2. Import the public key from a public key file. public-key peer keyname import sshkey filename
Configuring an SSH user
To configure an SSH user that uses publickey authentication, you must perform the procedure in this
section.
To configure an SSH user that uses password authentication, whether together with publickey
authentication or not, you must configure a local user account by using the local-user command for local
authentication, or configure an SSH user account on an authentication server, for example, a RADIUS
server, for remote authentication. For more information about the local-user command, see Security
Command Reference.
For password-only SSH users, you do not need to perform the procedure in this section to configure them
unless you want to use the display ssh user-information command to display all SSH users, including the
password-only SSH users, for centralized management.
Configuration guidelines
When you perform the procedure in this section to configure an SSH user, follow these guidelines:
You can set the service type to Stelnet, SFTP, and SCP (Secure copy). For more information about Stelnet,
see "Overview." F
or more information about SFTP, see "Configuring SFTP." For more information about
SCP, see "Configuring SCP."
• You can enable one of the following authentication modes for the SSH user:
{ Password—The user must pass password authentication.
{ Publickey authentication—The user must pass publickey authentication.
{ Password-publickey authentication—As an SSH2.0 user, the user must pass both password and
publickey authentication. As an SSH1 user, the user must pass either password or publickey
authentication.
{ Any—The user can use either password authentication or publickey authentication.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English