HP 3600 v2 Series Configuration Guide

50
Step Command Remarks
3. Configure a password for the
RADIUS user.
password [ cipher | simple ]
password
Optional.
By default, no password is
specified.
4. Configure the authorization
attribute for the RADIUS user.
authorization-attribute { acl
acl-number | vlan vlan-id } *
Optional.
Not configured by default.
5. Set the expiration time for the
RADIUS user.
expiration-date time
Optional.
By default, no expiration time is
set, and the system does not check
users' expiration time.
6. Configure a description for
the RADIUS user.
description text
Optional.
Not configured by default.
Specifying a RADIUS client
This task is to specify the IP address of a client to be managed by the RADIUS server and configure the
shared key. The RADIUS server processes only the RADIUS packets sent from the specified clients.
To specify a RADIUS client
Step Command Remarks
1. Enter system view.
system-view N/A
2. Specify a RADIUS client.
radius-server client-ip ip-address [ key
[ cipher | simple ] string ]
No RADIUS client is
specified by default.
NOTE:
• The IP address of a RADIUS client specified on the RADIUS server must be consistent with the source IP
address of outgoing RADIUS packets configured on the RADIUS client.
• The shared key confi
g
ured on the RADIUS server must be consistent with that confi
g
ured on the RADIUS
client.
Displaying and maintaining AAA
Task Command Remarks
Display the configuration
information of ISP domains.
display domain [ isp-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any view

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English