231
• The password must contain at least 12 characters.
• The password must consist of at least two types of valid characters, five or more of each type.
• The password aging time is 20 days.
Configuration procedure
# Enable the password control feature globally.
<Sysname> system-view
[Sysname] password-control enable
# Prohibit the user from logging in forever after two successive login failures.
[Sysname] password-control login-attempt 2 exceed lock
# Set the password aging time to 30 days for all passwords.
[Sysname] password-control aging 30
# Set the minimum password update interval to 36 hours.
[Sysname] password-control password update interval 36
# Specify that a user can log in five times within 60 days after the password expires.
[Sysname] password-control expired-user-login delay 60 times 5
# Set the maximum account idle time to 30 days.
[Sysname] password-control login idle-time 30
# Refuse any password that contains the username or the reverse of the username.
[Sysname] password-control complexity user-name check
# Specify that no character of the password can be repeated three or more times consecutively.
[Sysname] password-control complexity same-character check
# Specify that a super password must contain at least three types of characters and each type must
contain at least five characters.
[Sysname] password-control super composition type-number 3 type-length 5
# Configure a super password.
[Sysname] super password level 3 simple 12345ABGFTweuix
# Create a local user named test.
[Sysname] local-user test
# Set the service type of the user to Telnet.
[Sysname-luser-test] service-type telnet
# Set the minimum password length to 12 for the local user.
[Sysname-luser-test] password-control length 12
# Specify that the password of the local user must contain at least two types of characters and each type
must contain at least five characters.
[Sysname-luser-test] password-control composition type-number 2 type-length 5
# Set the password aging time to 20 days for the local user.
[Sysname-luser-test] password-control aging 20
# Configure the password of the local user in interactive mode.
[Sysname-luser-test] password
Password:***********
Confirm :***********
Updating user(s) information, please wait........