Chapter 2
Installing the System
Installing the Wheel Kit
49
Use the following procedure to install the wheel kit.
Step 1. Cut and remove the polystrap bands securing the server to the pallet.
Step 2. Lift the carton top from the cardboard tray resting on the pallet.
Step 3. Remove the bezel kit carton and top cushions (Figure 2-7) from the pallet.
Figure 2-7Server on Shipping Pallet
Step 4. Unfold bottom cardboard tray.
Top Cushions
Bezel Kit
Cardboard Tray
Shipping Pallet
To Next Page
Loading...
Need help?
General