Chapter 2
Installing the System
Installing the Wheel Kit
50
Step 5. Remove the front cushion only (Figure 2-8). Do not remove any other cushions until further
instructed.
Figure 2-8Removing Cushion from Front Edge of Server
Step 6. Open the wheel kit box and locate the two front casters. The front casters are shorter in length than
the two rear casters. Each front caster is designed to fit only on one corner of the server (right front
caster and left front caster).
Rear Cushion
Side Cushion
Front Cushion
To Next Page
Loading...
Need help?
General