HP PROCURVE 2910AL Configuration Guide

Multicast Listener Discovery (MLD) Snooping
Displaying MLD Status and Configuration
Displaying MLD Status and
Configuration
Current MLD Status
Syntax: show ipv6 mld
Displays MLD status information for all VLANs on the switch
that have MLD configured.
show ipv6 mld vlan <vid>
Displays MLD status for the specified VLAN
vid—VLAN ID
For example, a switch with MLD snooping configured on VLANs 8 and 9 might
show the following information:
ProCurve# show ipv6 mld
MLD Service Protocol Info
Total vlans with MLD enabled : 2
Current count of multicast groups joined : 37
VLAN ID : 8
VLAN NAME : VLAN8
Querier Address : fe80::218:71ff:fec4:2f00 [this switch]
Querier Up Time : 1h:37m:20s
Querier Expiry Time : 0h:1m:44s
Ports with multicast routers :
Active Group Addresses Type ExpiryTime Ports
---------------------------------------- ---- ---------- --------------------
ff02::c FILT 0h:4m:9s A15-A21
ff02::1:2 FILT 0h:4m:3s A21
ff02::1:3 FILT 0h:4m:9s A15-A21
ff02::1:ff00:42 FILT 0h:4m:0s A19
ff02::1:ff02:2 FILT 0h:4m:2s A15
ff02::1:ff02:3 FILT 0h:4m:5s A16
ff02::1:ff03:2 FILT 0h:4m:2s A17
ff02::1:ff03:3 FILT 0h:4m:5s A18
Figure 7-4. Example of Displaying the MLD Configuration for All Static VLANs on the Switch
7-12

HP PROCURVE 2910AL Specifications

General

Brand	HP
Model	PROCURVE 2910AL
Category	Switch
Language	English