Multicast Listener Discovery (MLD) Snooping
Displaying MLD Status and Configuration
Ports Currently Joined
Syntax: show ipv6 vlan <vid> group
Lists the ports currently joined for all IPv6 multicast group
addresses in the specified VLAN
vid—VLAN ID
show ipv6 vlan <vid> group <ipv6-addr>
Lists the ports currently joined for the specified IPv6 multicast
group address in the specified VLAN
vid—VLAN ID
ipv6-addr—address of the IPv6 multicast group for which you
want information
For example, the general form of the command is shown below. The specific
form of the command is similar, except that it lists the port information for
only the specified group.
ProCurve# show ipv6 mld vlan 9 group
MLD Service Protocol Group Info
VLAN ID : 9
VLAN Name : VLAN9
Filtered Group Address : ff02::c
Last Reporter : fe80::7061:4b38:dbea:2c4f
ExpiryTime : 0h:2m:19s
Port Port Type | Port Mode ExpiryTime
---- --------- + --------- --------------------
B3 100/1000T | auto 0h:2m:19s
B5 100/1000T | auto 0h:2m:18s
.
.
.
Filtered Group Address : ff3e:30:2001:db8:9:0:7:111
Last Reporter : fe80::7061:4b38:dbea:2c4f
ExpiryTime : 0h:4m:14s
Port Port Type | Port Mode ExpiryTime
---- --------- + --------- --------------------
B3 100/1000T | auto 0h:4m:14s
B5 100/1000T | auto 0h:4m:09s
Figure 7-8. Example of Ports Joined to Multicast Groups in a Specific VLAN
7-17
To Next Page
Loading...
Need help?
General