Quality of Service
Configuring a QoS Policy for a Specific VLAN
11-11
Click on the Return button to return to the Main QoS page.
Configuring a QoS Policy for a Specific
VLAN
This feature prioritizes network traffic on the basis of the priorities assigned
to the ID number for specific VLANs.
The VLAN page features:
■ VLAN ID—Lists the ID number(s) for any 802.1Q VLAN(s) that are config-
ured on your ProCurve switches.
■ Priority—The priority assigned to traffic for a given VLAN policy. For
example, assigning a priority of 7 (high priority) to a given VLAN ID means
that all traffic on that VLAN has the highest priority level.
■ Modify Selected Policy button—Displays the page used for changing the
priority setting for the selected VLAN ID.
■ Delete Selected Policy button—Deletes the existing policy for the
selected VLAN.
■ Apply All VLAN Policies button—Configures the VLAN policy on the QoS-
capable, discovered HP switches on the network. If you have added,
deleted, or changed any VLAN ID policies, you must click on this button
before proceeding.
■ Return button—Returns you to the Main QoS page.
How To Add a VLAN Policy
1. In the HP TopTools navigation frame, click on the Policies button.
2. Click on Quality of Service to display the Main QoS page.
3. In the Main QoS page click on VLAN to display the VLAN Policy page. This
page displays any currently configured VLAN policies.
4. To configure a policy for a specific VLAN, select a group, then click on the
Add New Policy button. Configure a new VLAN policy in the VLAN Policy
Configuration page.
To Next Page
Loading...
Need help?
General