13-6
Managing Switches
Configuring Switch Features
Figure 13-4. Switch Status Page with Network Interfaces
Configuring Switch Features
The Configuration page lets you configure many switch features, for example,
the sensitivity levels for Fault Detection. Click on a device in the Devices page
and select Properties (Device View) from the Actions menu. Click on the Config-
uration tab.
Device View
There is a Device View for every managed HP switch. The Device View for the
HP ProCurve Switch 2424M looks like the following graphic. Use the online
help to obtain information about specific switch modules.
To Next Page
Loading...
Need help?
General