172 Maintaining the switch configuration file
If fmsmode is enabled in a configuration file, but is disabled on the switch, the configDownload
command fails and displays an error message. This prevents undesirable conditions that could result from
enabling fmsmode on a switch that does not require it.
B-Series configuration form
Use this form (Table 46) as a hard copy reference for your configuration information.
In the hardware reference manuals for the HP StorageWorks 4/256 SAN Director and HP StorageWorks
DC SAN Backbone Director enterprise-class platform, there is a guide for FC port setting tables. The tables
can be used to record configuration information for the various blades.
Table 48 B-Series configuration and connection
B-Series configuration settings
IP address
Gateway address
Chassis configuration option
Management connections
Serial cable tag
Ethernet cable tag
Configuration information
Domain ID
Switch name
Ethernet IP address
Ethernet subnet mask
Total number of local devices (nsShow)
Total number of devices in fabric (nsAllShow)
Total number of switches in the fabric (fabricShow)
To Next Page
Loading...
Need help?
General