Fabric OS 6.2 administrator guide 299
Disabling topology discovery
1. Connect to the switch and log in as admin.
2. Enter the appropriate following command based on how you want to disable discovery:
• For the local switch, enter the mstdDisable command.
• For the entire fabric, enter the mstdDisable all command.
A warning is displayed, saying that all NID entries might be cleared.
3. Enter y to disable the discovery feature.
NOTE: Disabling discovery of management server topology might erase all NID entries.
switch:admin> mstddisable
This may erase all NID entries. Are you sure? (yes, y, no, n): [no] y
Request to disable MS Topology Discovery Service in progress....
*MS Topology Discovery disabled locally.
switch:admin> mstddisable all
This may erase all NID entries. Are you sure? (yes, y, no, n): [no] y
Request to disable MS Topology Discovery Service in progress....
*MS Topology Discovery disabled locally.
*MS Topology Discovery Disable Operation Complete!!
To Next Page
Loading...
Need help?
General