HP V1905 Series User Manual

25
Adding MAC Addresses to the Address Table
The Address Table Add Page allows the network manager to assign MAC addresses to ports with VLANs.
Click Monitoring  Address Table  Add. The Address Table Add Page opens.
Figure 62 Address Table Add Page
The Address Table Add Page contains the following fields:
Table 52 Address Table Add Page item description
Item Descri
p
tion
VLAN ID Selects a VLAN ID.
MAC Address Defines a MAC address to be assigned to the specific port and VLAN ID.
No Aging
Marks the aging status of the MAC address assigned by the user. The possible values
are:
 Checked: Indicates that the Address Table entry assigned by the user is not aged
out.
 Unchecked: Indicates that the Address Table entry assigned by the user is aged
out.
Defining Aging Time
The Address Table Aging Time Setup Page allows the network manager to define the Address Table Aging
Time. The Aging Time is the amount of time the MAC addresses remain in the Dynamic Address table before
they are timed out if no traffic from the source is detected. The default value is 300 seconds.
Click Monitoring  Address Table  Setup. The Address Table Aging Time Setup Page opens.
Figure 63 Address Table Aging Time Setup Page

HP V1905 Series Specifications

General

Brand	HP
Model	V1905 Series
Category	Switch
Language	English