4. Lift the front card guide and fan (4) as far as the front card guide and fan cable allows.
5. Disconnect the front card guide and fan cable (5) from the system board.
6. Remove the front card guide and fan.
To install the front card guide and fan, reverse the removal procedure.
Memory fan
To remove the memory fan, use these procedures.
Before removing the memory fan, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 18).
2. Remove the access panel (see Access panel on page 20).
Remove the memory fan:
1. Release the two retention clips (1) that secure the memory fan to the computer.
2. Tilt the memory fan (2) away from the computer.
3. Lift the memory fan (3) as far as the memory fan cable allows.
Memory fan
27
To Next Page
Loading...
Need help?
General