HP Z Series User Manual

Out of memory error
Use this information to troubleshoot the computer.
SolutionCause
Check the application documentation to determine the memory
requirements.
You have run out of memory to run the
application.
Memory count during POST is wrong
Use this information to troubleshoot the computer.
SolutionCause
Check that the memory modules have been installed correctly and that
proper modules are used.
The memory modules might not be installed
correctly.
No action required.Integrated graphics might use system
memory.
Insufficient memory error during operation.
Use this information to troubleshoot the computer.
Solution
Cause
Delete any TSRs that you do not need.Too many Terminate and Stay Resident
programs (TSRs) are installed.
Check the memory requirements for the application or add more memory
to the computer.
You have run out of memory for the
application.
Power light blinks red five times followed by a two-second pause and the
computer beeps five times (beeps stop after fifth iteration but lights continue
blinking)
Use this information to troubleshoot the computer.
Solution
Cause
1. Reseat DIMMs. Turn on the system.
2. Replace DIMMs one at a time to isolate the faulty module.
3. Replace third-party memory with HP memory.
4. Replace the system board.
Memory is installed incorrectly or is bad.
Solving USB flash drive problems
If you encounter USB flash drive problems, common causes and solutions are listed in these tables.
USB flash drive is not seen as a drive letter in Windows
Use this information to troubleshoot the computer.
Out of memory error
51

HP Z Series Specifications

General

Brand	HP
Model	Z Series
Category	Desktop
Language	English