• On the watch, go to Settings > About to view the Version of the watch.
• Open the Huawei Health app, touch Devices then the watch name, and touch Firmware
update to view the version number of the watch.
Powering on, powering o, and restarting the watch
Powering on
• Press and hold the Up button.
• Charge the device.
Powering
o
• Press and hold the Up button, and then touch Power o.
• Press the Up button and go to Settings > System > Power
o or Settings > System &
updates > Power o
• If the battery level is critically low, the watch will vibrate and then automatically power o.
• If the watch is not charged promptly after the standby time expires, it will automatically
power o.
Restarting
• Press and hold the Up button, and then touch Restart.
• Press the Up button and go to Settings > System > Restart or Settings > System &
updates > Restart.
Force restarting
Press and hold the Up button for at least 16 seconds.
Restoring the device to its factory settings
Method 1: Go to Settings > System > Reset or Settings > System & updates > Reset on
your watch.
Method 2: Open the Huawei Health app, touch Devices then your device name, and touch
Restore factory settings.
Personal data will be cleared from your device after you restore the device to its factory
settings. Exercise caution when performing this operation.
More
30