23 SUBSTANCES 102
Brake fluid DOT 4
Standard/classification
– DOT
Guideline
– Use only brake fluid that complies with the specified standard (see specifications on the container) and that possesses the cor-
responding properties.
Recommended supplier
Bel‑Ray
®
– Super DOT 4 Brake Fluid
Coolant
Guideline
– Only use high quality coolant with corrosion inhibitor for aluminum motors (even in countries with high temperatures). Using
inferior antifreeze can result in corrosion and foaming.
Mixture ratio
Antifreeze protection: −25… −45 °C (−13…
−49 °F)
anti-corrosion/antifreeze
distilled water
Recommended supplier
Bel‑Ray
®
– Moto Chill Racing Coolant
Engine oil (SAE 10W/50)
Standard/classification
– JASO T903 MA ( p. 105)
– SAE ( p. 105) (SAE 10W/50)
Guideline
– Use only engine oils that comply with the specified standards (see specifications on the container) and that possess the corre-
sponding properties.
Synthetic engine oil
Recommended supplier
Bel‑Ray
®
– Works Thumper Racing Synthetic Ester 4T
Fork oil (SAE 4) (48601166S1)
Standard/classification
– SAE ( p. 105) (SAE 4)
Guideline
– Use only oils that comply with the specified standards (see specifications on the container) and that exhibit the corresponding
properties.
Multi-purpose grease (00062010051)
Recommended supplier
Klüber Lubrication
®
– CENTOPLEX 2 EP
Shock absorber fluid (SAE 2.5) (50180751S1)
Standard/classification
– SAE ( p. 105) (SAE 2.5)
Guideline
– Use only oils that comply with the specified standards (see specifications on the container) and that exhibit the corresponding
properties.
To Next Page
Loading...
Need help?
General
