17 SERVICE WORK ON THE ENGINE 89
401955-12
–
Remove the oil filler plug
with the O-ring from the clutch cover and fill up with
engine oil.
Engine oil 1.0 l (1.1 qt.) Engine oil (SAE 10W/50) ( p. 102)
Info
Too little engine oil or poor-quality engine oil results in premature wear of
the engine.
– Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
– Always make sure there is sufficient ventilation when running the
engine.
– Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
– Start the engine and check that it is oil-tight.
Finishing work
– Check the engine oil level. ( p. 86)
17.4 Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear of the engine.
S00931-10
Main work
–
Remove oil filler plug
with the O-ring from the clutch cover.
–
Fill engine oil to the middle
of the level viewer.
– Add the same engine oil that was used when the last oil change was carried out.
Engine oil (SAE 10W/50) ( p. 102)
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
We recommended changing the engine oil when necessary.
– Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
– Always make sure there is sufficient ventilation when running the
engine.
– Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
– Start the engine and check that it is oil-tight.
Finishing work
– Check the engine oil level. ( p. 86)
To Next Page
Loading...
Need help?
General
