6 CONTROLS 13
F00044-10
–
Turn filler cap
counterclockwise and lift it off.
6.9 Closing the filler cap
F00044-11
–
Mount filler cap
and turn it clockwise until the fuel tank is tightly closed.
Info
Run the fuel tank breather hose
without kinks.
6.10 Cold start button
F00045-10
Cold start button
is fitted on the bottom of the throttle valve body.
The injection system extends the injection time if the engine is cold and the outside
temperature is low. To help the engine burn the increased amount of fuel, it must be
supplied with additional oxygen by pushing the cold start button.
After briefly opening up the throttle and then releasing the throttle grip again, or turn-
ing the throttle grip towards the front, the cold start button returns to its original posi-
tion.
Info
Check whether the cold start button has returned to its basic position.
Possible states
• The cold start button is activated – The cold start button is pushed in all the way.
• The cold start button is deactivated – The cold start button is in its basic posi-
tion.
To Next Page
Loading...
Need help?
General
