Husqvarna FE 350s 2021 - 12.42 Adjusting the basic position of the clutch lever; 12.43 Checking;correcting the fluid level of hydraulic clutch

SERVICE WORK ON THE CHASSIS 12
83
12.38 Checking the frame
F00255-01
– Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a
mechanical impact:
– Change the frame.
Info
Always replace a frame that has been
damaged due to a mechanical impact. Repair
of the frame is not authorized by Husqvarna
Motorcycles.
12.39 Checking the link fork
401520-01
– Check the link fork for damage, cracking, and deformation.
» If the link fork exhibits damage, cracking, or deformation:
– Change the link fork.
Info
Always replace a damaged link fork. Repair of
the link fork is not authorized by Husqvarna
Motorcycles.
12.40 Checking throttle cable routing
Preparatory work
– Remove the air filter box cover. ( p. 68)
– Remove the seat. ( p. 66)
– Remove the right side cover. ( p. 70)
– Remove the fuel tank. ( p. 75)