377Power Stacker
J
SureStak** Power Stacker
Contents of This Appendix
Introduction 377.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing the Power Stacker 378.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Power Stacker 383.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacement Procedures
Constant Force Spring 393.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Timing
Belts
396.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Illustrated Parts Breakdown 399.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction
The SureStak Power Stacker is a factory-installed option for cabinet model
line matrix printers.
Because all but a small portion of the stacker assembly is inside the cabinet,
the stacker assembly must be removed from the printer in order to service
the unit or replace most of its components.
This appendix consists of two parts:
♦ Removal/installation instructions for the power stacker assembly and
components that require the most frequent replacement.
♦ An illustrated parts breakdown (IPB) showing how the entire power
stacker unit is assembled. The IPB also lists the part numbers for
replaceable parts.
NOTE: Only replaceable parts have part numbers in the IPB. If you need to
replace a part for which no part number is shown, replace the entire
power stacker assembly.
To Next Page
Loading...
Need help?
General
