IBM Aptiva Series Hardware Maintenance

4-24
Memory(SIMM)
Attention: Memory modules are sensitive to static discharge.
• Remove all adapter cards.
•
Remove riser card
• Locate the two clips that hold the memory module in place. One clip holds
the left edge of the module and the other holds the right edge.
• At the same time, push both clips outward, away from the module. This
releases the module from the socket.
• Lift the module out of the socket.
• Lift the module out of the socket.
Figure 4- 19 Removing memory modules (SIMM)

IBM Aptiva Series Specifications

General

Brand	IBM
Model	Aptiva Series
Category	Desktop
Language	English