IBM Aptiva Series Hardware Maintenance

5-12
Figure 5- 9 5.25” Hard Disk Jumper Settings Layout
5.25” Hard Disk Drive Jumper Settings
The configuration of the following four jumpers controls the drive’s mode of
operation:
• DS – Drive Select
• CS/ SP–Cable Select / Slave Present
•
Park – Used as a place to store a jumper
Table 5-8 5.25” Hard Disk Drive Jumper Settings
DS CS/SP NOT USED Park DESCRIPTION
On Off -- -- Drive configured as a Master.
Off Off -- -- Drive configured as a Slave.
On On -- -- Drive configured as a Master,
with an attached Slave

IBM Aptiva Series Specifications

General

Brand	IBM
Model	Aptiva Series
Category	Desktop
Language	English