How do I use my infrared port as a communication port?
You can disable your computer's infrared port to free
resources for another communication device, such as the
serial port. If the infrared port is disabled, you must enable
it before you can use it again. To enable your infrared port,
do as follows:
1
Save your work and quit any program you are using.
2
Start the ThinkPad Configuration program.
3
Click on the Infrared button.
4
Click on Enable.
A “Warning” might appear that the hardware resource
is being used by another communication device.
5
Click on Disable Device.
Another “Warning” window prompts you to restart your
computer.
6
Click on OK. The computer restarts.
Note: If you check your infrared port and it is already
enabled, you can use it immediately without changing
any settings.
After your infrared port is enabled, you can use it as a
communication port. If it does not work properly, you might
have a problem with your communication software or the
device that you are trying to communicate with. Check the
online help system for your communication software if the
other device appears to be working properly.
How do I use my serial port as a communication port?
You can disable your computer's serial port to free
resources for another communication device, such as the
infrared port. If it is disabled, you must enable it before you
can use it again. To enable your serial port, do as follows:
1
Save your work and any program you are using.
2
Start the ThinkPad Configuration program.
3
Click on the Serial Port button.
94
IBM ThinkPad 600 Online Book
To Next Page
Loading...
Need help?
General
