Installing Software for OS/2 Warp 4
This section describes how to install OS/2 with DOS and Windows
3.11, as well as the OS/2 ThinkPad device drivers.
Overall Procedure
1
Have the DOS, Windows 3.11, and OS/2 installation packages
in hand.
2
Back up your software and personal data files on the hard disk.
|
3
Go to the ThinkPad Web site and download the latest hardware
| driver diskettes. You need to create at least the following
device driver diskettes:
4
Install OS/2 and the software.
Device Driver Diskette Name
ThinkPad Configuration
program
Utility Diskette for OS/2
Display driver Video Features Diskette III for OS/2
PC Card support software PC Card Director for OS/2
Audio device driver Audio Features Diskette for OS/2
ThinkPad Modem software ThinkPad Modem for OS/2
TrackPoint driver TrackPoint Driver Diskette for OS/2
CD-ROM device driver CD-ROM Driver Diskette
Installing IBM OS/2
Preparing for the Installation of OS/2
|
1
Create OS/2 Warp Version 4 Install Diskette 1 & Diskette 2
Update and OS/2 Warp Version 4 Install Diskette 2 Update
using the Diskette Factory Program (refer to the
User's
Reference
).
2
Install OS/2 Warp Version 4 from the installation diskettes or
CD-ROM.
Chapter 8. Installing Software 169
To Next Page
Loading...
Need help?
General
