5
Click on the Next button and follow the instructions on the
screen.
You should be able to use your ThinkPad Modem with all the modem
communication applications supported by Windows NT.
Installing the Infrared Device Driver for Windows NT
You can use infrared features using Windows NT dial-up networking.
The Windows NT infrared device driver provides you IrDA 1.0
compliant functions, enabling infrared communication up to 115
Kbps.
To install the infrared device driver for Windows NT:
1
Start Windows NT, and log on with the user ID authorized as
an administrator.
2
Click on Start and Run.
3
Insert the Infrared Features Diskette II into the diskette drive.
4
Type A:\INSTALL and press Enter.
Follow the instructions on the screen.
5
Restart the computer.
After the installation, COM 1, IRQ 4, and I/O address X'3F8' are
assigned for the infrared port.
To enable the infrared port as COM 1, use the ThinkPad
Configuration program.
You have finished the entire procedure.
If you want to change the COM port for the infrared
communication,
go on to Changing the COM Port for the Infrared
Port.
If you want to configure the infrared port for dial-up networking,
go on to Configuring the Infrared Port for Dial-Up Networking.
158
IBM ThinkPad 600 Online Book
To Next Page
Loading...
Need help?
General
