Using a PC Card in Windows 95 (with CardWorks)
You can make your PC Card easy to use with the PC Card support
software called CardWorks. It is supported only by the Windows 95
OEM Service Release Version 2 (OSR2).
CardWorks minimizes user intervention in configuring many PC
Cards. CardWorks with CardWizard provides the following:
Capability to check
Self-Check
If you have a problem, refer to this section.
PC Card information
PC Card Information
CardWorks provides various information about your PC Card.
Capability to stop
Stopping the PC Card
If you remove the PC Card from your computer, sometimes you
need to stop the PC Card.
Help
Help
You can get help for most of the windows.
CardWorks provides two modes for using a PC Card:
Plug and Play mode:
You can use the PC Card in this mode when the device
driver of the card is supported by Windows 95.
CardSoft mode:
You can use the PC Card in this mode when the device
driver of the PC Card is for Windows 3.11.
To start CardWizard, do as follows:
1
Click on Start.
2
Move the cursor to Programs and CardWorks. Then click on
CardWizard.
The CardWizard window appears:
Chapter 5. Using Your Computer with a PC Card 45
To Next Page
Loading...
Need help?
General
