4. Click Remove to continue or Cancel to stop the removal and exit the
uninstallation process. Click Back to return to the previous window. When you
click Remove, the Uninstaller Uninstallation Progress window is displayed.
When the uninstallation process is finished, the Finish window is displayed
containing a statement about the success or failure of the uninstallation process.
During the uninstallation process, the following system checks are made:
v A check of your system to detect if DS Storage Manager Server is used by
other programs on the system and if not used, removes it from the system.
Otherwise, the DS Storage Manager Server is not removed from your
system.
v A check of your system to detect if DS Network Interface Server is used by
other programs on the system and if not used, removes it from the system.
Otherwise, the DS Network Interface Server is not removed from your
system.
When the uninstall process is finished, the Uninstaller Finish window is
displayed containing a statement about the success or failure of the
uninstallation process.
Uninstaller Finish window
5. Click Finish to complete the removal process and exit the uninstallation
program.
Removing the DS8000 Storage Manager from a Linux operating system
using the silent mode
You can remove the IBM TotalStorage DS Storage Manager from your Linux
operating system by using the silent (unattended mode).
1. Log on as root to the system where the DS8000 Storage Manager is installed.
2. Type # <dest_path>\_uninst\uninstall.exe -silent, where <dest_path> is the
path where the DS8000 Storage Manager is installed. This runs the
uninstallation program.
3. Wait for the program to remove the DS8000 Storage Manager.
Chapter 3. Installing on the Linux operating system 71
To Next Page
Loading...
Need help?
General