Icom IC-R6 User Manual

9
New2001
FREQUENCY AND CHANNEL SETTING
3
■ VFO and memory channels
The IC-R6 has two normal operating modes: the VFO mode
and the memory mode.
The VFO mode is used for a desired frequency setting
within the frequency coverage.
➥ Push [V/M] to select the VFO mode.
The memory mode is used for quick recall of the prepro-
grammed memory channels.
➥ Push [V/M] to select the memory mode.
• See page 19 for memory programming details.
[DIAL]
“ ” and memory channel
number appear.
• VFO mode display
• Memory mode display
What is VFO?
VFO is an abbreviation of Variable Frequency Oscillator.
Operating frequencies are generated and controlled by the
VFO.
■ Frequency band selection
The receiver can receive the AM broadcast, HF band, 50 MHz,
FM broadcast, VHF air, 144 MHz, 300 MHz, 400 MHz,
800 MHz,* 1200 MHz or Weather channels
†
.
Available frequency bands differ, depending on the ver-
sion. See the specifications for details.
* Some frequency ranges are prohibited in the USA ver-
sion by regulation.
†
Available in only the USA version.
➥ Push [BAND] repeatedly to select a desired frequency
band.
• When the memory mode is selected, push [V/M] to select the
VFO mode first, then push [BAND] to select a desired band.
➥ While holding down [BAND], rotating [DIAL] also selects
the frequency band.
[DIAL]

Icom IC-R6 Specifications

General

Product color	Black
Channels quantity	1550 channels
Supported radio bands	AM, FM
Battery type	AA
Number of batteries supported	2
Impedance	16 Ω
Frequency range	0.1 - 1309.995 MHz
Product type	Portable CB radio
Housing material	-

Weight and Dimensions

Depth	29.8 mm
Width	58 mm
Height	86 mm
Weight	200 g