Icom IC-R6 User Manual

11
3
FREQUENCY AND CHANNEL SETTING
New2001
■ Setting a frequency
q Push [V/M] to select the VFO mode, if necessary.
w Select a desired frequency band with [BAND].
• Or, while holding down [BAND], rotate [DIAL] to select a
desired frequency band.
e Rotate [DIAL] to select a desired frequency.
• The frequency changes according to the preset tuning step. See
the section to the right for setting the tuning step.
• While holding down [FUNC], rotate [DIAL] to change the fre-
quency in 1 MHz steps (default).
[DIAL]
[DIAL] changes the
frequency according to
the selected tuning step.
While holding down
[FUNC], rotating [DIAL]
changes the frequency
in 1 MHz steps (default).
The MHz tuning step (dial select step) can be set to
100 kHz, 1 MHz or 10 MHz tuning steps in the Set mode.
See page 17 for details.
■ Setting a tuning step
The tuning step can be selected for each frequency band.
However, additional steps become selectable in only theadditional steps become selectable in only the
VHF Air band (8.33 kHz) and in the AM broadcast band
(9 kHz). The following tuning steps are available for theThe following tuning steps are available for the
IC-R6.
• 5.0 kHz • 6.25 kHz • 8.33 kHz • 9.0 kHz
• 10.0 kHz • 12.5 kHz • 15.0 kHz • 20.0 kHz
• 25.0 kHz • 30.0 kHz • 50.0 kHz • 100.0 kHz
• 125.0 kHz • 200.0 kHz
D Tuning step selection
q Push [V/M] to select the VFO mode, if necessary.
w Push [BAND] to select a desired frequency band.
• Or, while holding down [BAND], rotate [DIAL] to select a
desired frequency band.
e Push [TS] to enter the tuning step selecting mode.
r Rotate [DIAL] to select a desired tuning step.
t Push [TS] to return to the VFO mode.
[DIAL]
5 kHz tuning step

Icom IC-R6 Specifications

General

Product color	Black
Channels quantity	1550 channels
Supported radio bands	AM, FM
Battery type	AA
Number of batteries supported	2
Impedance	16 Ω
Frequency range	0.1 - 1309.995 MHz
Product type	Portable CB radio
Housing material	-

Weight and Dimensions

Depth	29.8 mm
Width	58 mm
Height	86 mm
Weight	200 g