Icom IC-R6 User Manual

24
5
MEMORY CHANNELS
New2001
5
■ Copying memory contents
This function copies a memory channel’s contents to the VFO
(or another memory channel). This is useful when searching for
signals around a memory channel frequency and for recalling
the frequency offset, subaudible tone frequency etc.
D MemoryVFO
q Select the memory channel to be copied.
➥ Push [V/M] to select the memory mode, then rotate
[DIAL] to select a desired channel.
• If desired, push [BAND] repeatedly to select a desired bank
group, then rotate [DIAL] to select a desired bank channel.
w Hold down [S.MW](V/M) for 1 second to enter the select
memory write mode.
• 1 short and 1 long beep sounds.
• The “ ” icon and memory channel number blink.
e Rotate [DIAL] to select “VF.”
r Hold down [S.MW](V/M) for 1 second to write the selected
channel contents into the VFO.
• The VFO mode is automatically selected.
Holding down [S.MW](V/M) for 2 seconds in step w will
also copy the memory contents to the VFO. In that case,
steps e and r are not necessary.
D Memorymemory
q Select the memory channel to be copied.
➥ Push [V/M] to select the memory mode, then rotate
[DIAL] to select a desired channel.
w Hold down [S.MW](V/M) for 1 second to enter the select
memory write mode.
• 1 short and 1 long beep sounds.
• The “ ” icon and memory channel number blink.
• Do not hold down [S.MW](V/M) for more than 2 seconds.
Otherwise the memory contents will be copied to the VFO.
e Rotate [DIAL] to select the target memory channel.
r Hold down [S.MW](V/M) for 1 second again to copy.
Rotate .
Hold down for 1 sec.
Hold down for 1 sec. to program.
Select the memory channel
[EXAMPLE]: Copying channel 20 to 51.

Icom IC-R6 Specifications

General

Product color	Black
Channels quantity	1550 channels
Supported radio bands	AM, FM
Battery type	AA
Number of batteries supported	2
Impedance	16 Ω
Frequency range	0.1 - 1309.995 MHz
Product type	Portable CB radio
Housing material	-

Weight and Dimensions

Depth	29.8 mm
Width	58 mm
Height	86 mm
Weight	200 g