Image Access WideTEK 36 Setup And Assembly Manual

B.3.4 Firmware Update
The Image Access Customer Service Portal at http://service.imageaccess.de offers
downloads of firmware updates for every Scan2Net scanner. As a registered user, login
with your personal login name and password.
Select Actions S2N Device Updates to download the current firmware version. Enter the
serial number of your scanner and the version number of the firmware installed on the
scanner.
Download the current firmware version to your local PC.
Start the scanner. Select Setup Device and go to the login level Poweruser .
In the main menu screen, locate the section Updates & Uploads and click the
Update Scanner Firmware button.
Browse your local PC and select the previously downloaded firmware update file.
Picture 41: Firmware Update
After the firmware update is complete the scanner must be rebooted to activate the new
firmware.
Select “Reboot” in the line Post update behavior to reboot automatically after the
updating the firmware.
Setup and Assembly Manual Page 43

Image Access WideTEK 36 Specifications

General

Brand	Image Access
Model	WideTEK 36
Category	Scanner
Language	English