Image Access WideTEK 36 Setup And Assembly Manual

After removing the front screws, the glass plate rack hangs in the upper crossbeam. Hold
it at its external ends and lift it a little upwards.
Picture 66: Holding the glass plate rack
Then it can be removed in direction of the document table.
Picture 67: Removing the glass plate rack
The new glass plate rack will be mounted in reverse order. Ensure that all cables are
properly connected to the TFT display. Fasten the screw on the TFT display which holds
the cable connector only hand-screwed.
Setup and Assembly Manual Page 57

Image Access WideTEK 36 Specifications

General

Brand	Image Access
Model	WideTEK 36
Category	Scanner
Language	English