Image Access WideTEK 36 Setup And Assembly Manual

C.5 Network Analyzer
This function provides information about the data transfer speed of the network where the
Scan2Net scanner is installed.
Locate the section Adjustments & Support in the Poweruser main menu screen and
click the Network Analyzer button.
Picture 70: Network Analyzer screen
Click on the Perform Speed Test button and enter the IP address of the device which
should be the target for the test. Also enter the number of packets that should be sent for
testing. Click the Perform Test button to start the test.
Picture 71: IP address for testing
The test results will be
displayed in a diagram.
Page 60 Setup and Assembly Manual

Image Access WideTEK 36 Specifications

General

Brand	Image Access
Model	WideTEK 36
Category	Scanner
Language	English