Safety Information and Precautions MD380 User Manual
- 10 -
Chapter 1 Safety Information and Precautions
In this manual, the notices are graded based on the degree of danger:
•
indicates that failure to comply with the notice will result in severe personal
injury or even death.
•
indicates that failure to comply with the notice will result in personal injury
or property damage.
Read this manual carefully so that you have a thorough understanding. Installation,
commissioning or maintenance may be performed in conjunction with this chapter. Inovance
will assume no liability or responsibility for any injury or loss caused by improper operation.
1.1 Safety Information and Precautions
Use Stage
Safety
Grade
Precautions
Before
installation
• Do not install the equipment if you nd water seepage,
component missing or damage upon unpacking.
• Do not install the equipment if the packing list does not conform
to the product you received.
• Handle the equipment with care during transportation to prevent
damage to the equipment.
• Do not use the equipment with damaged or missing components.
Failure to comply will result in personal injury.
• Do not touch the components with your hands. Failure to comply
will result in static electricity damage.
During
installation
• Install the equipment on incombustible objects such as metal,
and keep it away from combustible materials. Failure to comply
may result in a re.
• Do not loosen the xed screws of the components, especially
the screws with red mark.
• Do not drop wire end or screw into the AC drive. Failure to
comply will result in damage to the AC drive.
• Install the AC drive in places free of vibration and direct sunlight.
• Arrange the installation positions properly when two AC drives are
laid in the same cabinet to ensure the cooling effect.
To Next Page
Loading...
Need help?
General