CUTTING UNITS
4222983 Second Edition 6-21
6
Center Reel Bumper Adjustment
See Figures 6-15 through 6-17.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-6.)
2. Swing center cutting unit under the machine and lock
into position.
Figure 6-15: Models 62803 (Gas) and 62805 (Diesel)
Figure 6-16: Model 62801 (Electric)
NOTE
For Eclipse 322 Models 62803 (Gas) and 62805 (Diesel),
see figure 6-15. For Eclipse 322 Model 62801 (Electric),
see figure 6-16.
3. Loosen two screws (1).
4. Engage the mow switch and raise the center cutting
unit (3) to the fully up position.
5. Adjust left side bumper (2) to contact the center
cutting unit (3).
6. Tighten two screws (1).
Figure 6-17
7. Loosen two screws (5).
8. Adjust right side bumper (6) to contact the center
cutting unit (7).
9. Tighten two screws (5).
10. Adjust center bumper (4) if required.
TN2779
3
2
1
TN2781
TN2781
1
2
TN2780
4
6
5
7
To Next Page
Loading...
Need help?
General
