4 - 17
892/01083 Powershift - Assembly tool, transfer gear.
892/01084 Powershift - Transfer gear, bearing assembly.
892/01085 Powershift - Seal fitting tool
Powershift - Support plates, for use with transmission jack,
Manufacture locally, for details see Section F, Service
Tools.
892/01082 - Powershift - Assembly Cradle, for details see
Section F, Service Tools.
Powershift - Gearbox hydraulic pump removal tools, allow
pump to be removed with torque converter housing fitted to
gearbox. Manufacture locally, for details see Section F,
Service Tools.
Section 1 General Information
9803/3280
Section 1
4 - 17
Issue 3*
Service Tools (cont'd)
Section F - Transmission
823/10420 Thrust Washer Kit - Powershift
gearbox - Layshaft clutch
Comprises of:
Washer thickness mm
823/10421 4.3
823/10422 4.4
823/10423 4.5
823/10424 4.6
823/10425 4.7
823/10426 4.8
*
892/01096 Speed Sensor Test Harness -
Powershift Gearbox
*
892/01094 Transmission Jack
When removing the Powershift gearbox use of a special
transmission jack is strongly recommended. This jack
can also be used when removing Synchro Shuttle
gearboxes.
Note that the jack must be used with special support
plates, see below.
To Next Page
Need help?
General
