PERMANENTLY MOUNTING
THE MITRE SAW
To reduce the risk of injury from
unexpected saw movement, place
the saw in the desired location either
on a workbench or other suitable
machine stand. The base of the saw
has four mounting holes through
which suitable bolts (not supplied)
can be placed to secure the mitre
saw. If the saw is to be used in one
location, permanently fasten it to
the workbench using appropriate
fastenings (not supplied). Use locking
washers and nuts on the underside of
the workbench. (See )
1) To avoid injury from ying debris,
position the saw so that other
people or bystanders cannot stand
too close (or behind) it.
2) Locate the saw on a rm, level
surface where there is plenty of
room for handling and properly
supporting the workpiece.
3) Support the saw so the machine
table is level and the saw does not
rock.
4) Bolt or clamp the saw securely
to its support stand or workbench.
1
1
To Next Page
Loading...
Need help?
General
