jcb JCB-SCMS210 User Manual

If necessary the pointer can be
repositioned by loosening its
fastening screw using a #2 Phillips
screwdriver, adjusting as necessary
and then tightening the xing screw
securely.
CUTTING HEAD TRAVEL
Cutting Head Downward Travel
Adjustment (See )
To prevent the blade from contacting
any part of the machine metal base
the downward travel of the Cutting
Head can be adjusted.
Lower the Cutting Head and check
for any blade contact with the
machines base.
If the downward travel of the Cutting
Head needs to be adjusted:
1. Loosen the locknut on the
downward travel stop screw.
2. Turn the adjusting screw out
(counter-clockwise) to decrease the
downwards travel of the Cutting
Head.
3. Turn the adjusting screw
in (clockwise) to increase the
downwards travel of the Cutting
Head.
4. Tighten the adjustment screw
locknut when satisfactory downward
travel of the Cutting Head is
achieved.
37

jcb JCB-SCMS210 Specifications

General

Brand	jcb
Model	JCB-SCMS210
Category	Saw
Language	English