GENERAL SAFETY WARNINGS
FOR YOUR LASER
WARNING: Read all
safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in serious injury.
Save all warnings and instructions for
future reference.
These lasers do not normally present
an optical hazard although staring at
the beam may cause ash blindness.
Do not stare directly at the laser
beam. A hazard may exist if you
deliberately stare into the beam.
Please observe the following safety
rules:
1. The laser shall be used and
maintained in accordance with the
manufacturers instructions.
2. Never aim the beam at any person
or object other than the workpiece.
3. The laser beam must not be
deliberately aimed at another person
and should be prevented from being
inadvertently directed towards the
eyes of a person or animal.
4. Always ensure the laser beam is
only aimed at a workpiece without
reective surfaces e.g. natural
wood or matt or rough coated
surfaces are acceptable.
5. Do not replace the laser unit with
a different type. Repairs to the laser
unit must only be carried out by the
manufacturer or an authorised agent.
6. CAUTION: The use of any other
control devices or attempting any
adjustments other than those
specied in this Instruction Manual
may result in hazardous radiation
exposure.
ORIGINAL INSTRUCTIONS
GENERAL POWER TOOL GENERAL SAFETY WARNINGS
To Next Page
Loading...
Need help?
General
