Delay (Flap System)
A28
The Delay parameter determines how long it takes for
the flaps and Elevator to reach their positions. The
XP9303 automatically times the Flaps and Elevator so
that they reach their positions at the same time, resulting
in very smooth Flap deployment and retraction. The Delay
is adjustable in .1 second increments up to a maximum
of 2 seconds.
1. Highlight and select Delay in the Flap System
display using the Selector. Then use the rotary to
select a delay between .1 second and 2.0 seconds.
To Next Page
Loading...
Need help?
General
