JUKI Sewing Machine User Manual

–
134
–
Communication function can download the sewing data created with other sewing machine, creation of
sewing data and sewing data created by editing device PM-1 to the sewing machine. In addition, the
function can upload the aforementioned data to the media or personal computer.
Media and RS-232C port are prepared as the means to communicate.
16-1 Handling possible data
16. USING COMMUNICATION FUNCTION
Handling possible sewing data are two kinds below. The respective data formats are as described below.
Data name Extension Description of data
VD00
.vdt
DP00
.epd
Data of the needle entry point created with
PM-1
Format of the data which can be used in
common among JUKI sewing machines.
Format of the data of sewing proper to DP
such as number of steps, length of step,
shirring amount, thread tension value, etc.
created with the sewing machine
Vector format data
Parameter data
In case of saving the data in the media, save the data in the state of directory structure below.
When the data are not saved in the correct folder, reading of le cannot be performed.
: le No.
There is beforehand the PROG folder in the media purchased from our company. Do not
delete it.
Media drive
VDATA
DP2100
Save vector
format data.
Save parameter
data (exclusive for
DP).
VD00
.vdt
VD00
.vdt
VD00
.vdt
DP00
.epd
DP00
.epd
DP00
.epd
Pictograph

JUKI Sewing Machine Specifications

General

Brand	JUKI
Model	Sewing Machine
Category	Sewing Machine
Language	English