To Next Page

To Previous Page

0201.GB

D 2

2Battery types

Depending on the truck version, the truck will be supplied with different battery types.

The table below shows the capacity of the batteries and also the combinations used

as standard equipment:

The battery weights can be seen on the battery identification plate.

Depending on the type of battery used, it is also possible to use models with enhan-

ced performance or maintenance-free batteries.

When replacing or installing batteries, ensure that the battery is correctly secured in

the battery compartment of the truck.

3 Exposing the battery

Park the truck and render it safe (refer to chapter E).

Only use the handles (2) to open or close the battery hood.

– Grip the two handles (2) and swivel the battery hood (1) upwards until reaching the

stop.

The hood is held in this position only by its dead weight.

– Close the battery hood using the handles (2).

All covers and connections must be restored to the normal operating condition before

the truck is started up for work.

24 V PzS battery 3 PzS 480 Ah L

24 V PzS battery 3 PzS 560 Ah L

24 V PzS battery

performance-enhanced

3 PzS 600 Ah-HX