Jungheinrich ECP 100-3 User Manual

0803.GB
F 4
4 Maintenance intervals
:
Maintenance intervals
standard = t WMMM
cold store = k 13612
Chassis
and super-
struct.
1.1 Check all load bearing elements for damage t
1.2 Check all bolted connections t
1.3 Check platform for correct functioning and damage t
Drive unit 2.1 Check the transmission for noises and leakage t
2.2 Check the transmission oil level t
2.3 Change the transmission oil lt
Wheels 3.1 Check for wear and damage t
3.2 Check the wheel bearings for correct fastening a) lt
Steering 4.1 Check the steering wheel play t
4.2 Check the steering chain and chain sprocket
for wear, adjust and grease
lt
Brake
system
5.1 Performance and adjustment check lt
5.2 Check the brake linings for wear t
5.3 Check the brake linkage; adjust if necessary t
Hydraulic
system
6.1 Performance check lt
6.2 Check all connections for leakage and damage b) lt
6.3 Check hydraulic cylinders for leakage, damage
and secure attachment
lt
6.4 Check the oil level lt
6.5 Change hydraulic oil and filter cartridge c) lt
6.6 Check the pressure relief valves for
correct functioning
lt
Electrical
system
7.1 Performance check t
7.2 Check all cables for secure connection and damage t
7.3 Check the fuses for correct amperage t
7.4 Check switches and trip cams for secure attachment and
correct functioning
t
7.5 Check the warning installation for correct functioning lt
7.6 Check contactors, replace wearing parts if necessary t
Electric
motors
8.1 Check the carbon brushes for wear t
8.2 Check the motor for secure attachment t
8.3 Clean motor housing by means of a vacuum cleaner and
check the commutator for wear
lt
0803.GB
F 4
4 Maintenance intervals
:
Maintenance intervals
standard = t WMMM
cold store = k 13612
Chassis
and super-
struct.
1.1 Check all load bearing elements for damage t
1.2 Check all bolted connections t
1.3 Check platform for correct functioning and damage t
Drive unit 2.1 Check the transmission for noises and leakage t
2.2 Check the transmission oil level t
2.3 Change the transmission oil lt
Wheels 3.1 Check for wear and damage t
3.2 Check the wheel bearings for correct fastening a) lt
Steering 4.1 Check the steering wheel play t
4.2 Check the steering chain and chain sprocket
for wear, adjust and grease
lt
Brake
system
5.1 Performance and adjustment check lt
5.2 Check the brake linings for wear t
5.3 Check the brake linkage; adjust if necessary t
Hydraulic
system
6.1 Performance check lt
6.2 Check all connections for leakage and damage b) lt
6.3 Check hydraulic cylinders for leakage, damage
and secure attachment
lt
6.4 Check the oil level lt
6.5 Change hydraulic oil and filter cartridge c) lt
6.6 Check the pressure relief valves for
correct functioning
lt
Electrical
system
7.1 Performance check t
7.2 Check all cables for secure connection and damage t
7.3 Check the fuses for correct amperage t
7.4 Check switches and trip cams for secure attachment and
correct functioning
t
7.5 Check the warning installation for correct functioning lt
7.6 Check contactors, replace wearing parts if necessary t
Electric
motors
8.1 Check the carbon brushes for wear t
8.2 Check the motor for secure attachment t
8.3 Clean motor housing by means of a vacuum cleaner and
check the commutator for wear
lt

Jungheinrich ECP 100-3 Specifications

General

Brand	Jungheinrich
Model	ECP 100-3
Category	Forklifts
Language	English