Jungheinrich ECP 100-3 User Manual

E 21
0803.GB
5.3 Displays
The display shows operating data and fault messages. The user menu permits the
setting of the following driving parameters:
ACCELERATION
L
Here, the time between max. operation of the controller
and 100% control by the electronics is set.
This parameter can only be adjusted by the manufacturer's
service personnel.
This parameter has no function for this truck.
RELEASE BRAKE
L
INVERSION BRAKE
L
MAX. SPEED FORW.
L
CUT BACK FORW.
L
MAX REVERS. SPEED
L
CUT BACK REVERS.
L
BUZZER ON/OFF
L
RELOAD
L
1
Issues an acoustic alarm in case of operating errors.
Preset values can be called up and adjusted.
This parameter can only be adjusted by the manufacturer's
service personnel.
This parameter can only be adjusted by the manufacturer's
service personnel.
This parameter can only be adjusted by the manufacturer's
service personnel.
This parameter can only be adjusted by the manufacturer's
service personnel.
E 21
0803.GB
5.3 Displays
The display shows operating data and fault messages. The user menu permits the
setting of the following driving parameters:
ACCELERATION
L
Here, the time between max. operation of the controller
and 100% control by the electronics is set.
This parameter can only be adjusted by the manufacturer's
service personnel.
This parameter has no function for this truck.
RELEASE BRAKE
L
INVERSION BRAKE
L
MAX. SPEED FORW.
L
CUT BACK FORW.
L
MAX REVERS. SPEED
L
CUT BACK REVERS.
L
BUZZER ON/OFF
L
RELOAD
L
1
Issues an acoustic alarm in case of operating errors.
Preset values can be called up and adjusted.
This parameter can only be adjusted by the manufacturer's
service personnel.
This parameter can only be adjusted by the manufacturer's
service personnel.
This parameter can only be adjusted by the manufacturer's
service personnel.
This parameter can only be adjusted by the manufacturer's
service personnel.

Jungheinrich ECP 100-3 Specifications

General

Brand	Jungheinrich
Model	ECP 100-3
Category	Forklifts
Language	English