EasyManuals Logo
Home>Jungheinrich>Forklifts>ECP 100-3

Jungheinrich ECP 100-3 User Manual

Jungheinrich ECP 100-3
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
E 11
0803.GB
f
To avoid falling down: The driver must not leave the driver position while the driver
stand platform is lifted - climbing over onto structural works or other vehicles is not
permitted. In the case of longitudinal deposition, it is possible that packages cannot
be reached from the operator platform without additional measures. The operator
must provide the operating personnel with suitable measures so that it is possible to
safely commission packages.
A
The truck described in the present operating instructions is not approved for towing
trailers.
4.2 Driving, steering, braking
f
Be extremely careful when driving and steering, especially when parts of the body
protrude from the truck contour.
The electric steering system is self-monitoring.
The steering control systems monitors the fault frequency over a certain period. If the
same fault is detected several times during this period, the steering control reduces
the driving speed of the truck to low speed. If such a fault occurs, the driving speed
is not reset to normal speed by switching the truck off and on again. This method pre-
vents the cancellation of a fault without eliminating the fault.
f
As the steering system is a safety-relevant component, the fault must be eliminated
by trained service personnel.
E 11
0803.GB
f
To avoid falling down: The driver must not leave the driver position while the driver
stand platform is lifted - climbing over onto structural works or other vehicles is not
permitted. In the case of longitudinal deposition, it is possible that packages cannot
be reached from the operator platform without additional measures. The operator
must provide the operating personnel with suitable measures so that it is possible to
safely commission packages.
A
The truck described in the present operating instructions is not approved for towing
trailers.
4.2 Driving, steering, braking
f
Be extremely careful when driving and steering, especially when parts of the body
protrude from the truck contour.
The electric steering system is self-monitoring.
The steering control systems monitors the fault frequency over a certain period. If the
same fault is detected several times during this period, the steering control reduces
the driving speed of the truck to low speed. If such a fault occurs, the driving speed
is not reset to normal speed by switching the truck off and on again. This method pre-
vents the cancellation of a fault without eliminating the fault.
f
As the steering system is a safety-relevant component, the fault must be eliminated
by trained service personnel.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich ECP 100-3 and is the answer not in the manual?

Jungheinrich ECP 100-3 Specifications

General IconGeneral
BrandJungheinrich
ModelECP 100-3
CategoryForklifts
LanguageEnglish

Related product manuals