EasyManuals Logo
Home>Jungheinrich>Forklifts>ECP 100-3

Jungheinrich ECP 100-3 User Manual

Jungheinrich ECP 100-3
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
0803.GB
F 8
6 Instructions for the servicing operations
6.1 Preparing the truck for the performance of servicing and maintenance
operations
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
Park the truck and render it safe (refer to chapter E).
Disconnect the battery plug to prevent accidental starting of the truck (refer to chap-
ter D).
f
When work has to be performed under the raised fork or under the jacked up truck,
suitable measures must be taken to prevent any dropping, tilting or slipping of the fork
or truck. When lifting the truck, the instructions contained in chapter “Transportation
and commissioning” have to be observed.
6.2 Opening the battery hood
Refer to chapter D.
6.3 Opening the front hood
Unlock the hood locking mechanism (2) using an Allen key (3).
Slightly pull the front hood (1) to the front, lift it off, remove it by pulling it upwards
and deposit it safely
2
3
1
0803.GB
F 8
6 Instructions for the servicing operations
6.1 Preparing the truck for the performance of servicing and maintenance
operations
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
Park the truck and render it safe (refer to chapter E).
Disconnect the battery plug to prevent accidental starting of the truck (refer to chap-
ter D).
f
When work has to be performed under the raised fork or under the jacked up truck,
suitable measures must be taken to prevent any dropping, tilting or slipping of the fork
or truck. When lifting the truck, the instructions contained in chapter “Transportation
and commissioning” have to be observed.
6.2 Opening the battery hood
Refer to chapter D.
6.3 Opening the front hood
Unlock the hood locking mechanism (2) using an Allen key (3).
Slightly pull the front hood (1) to the front, lift it off, remove it by pulling it upwards
and deposit it safely
2
3
1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich ECP 100-3 and is the answer not in the manual?

Jungheinrich ECP 100-3 Specifications

General IconGeneral
BrandJungheinrich
ModelECP 100-3
CategoryForklifts
LanguageEnglish

Related product manuals