11
11.14 EN
A Correct Use and Application
1 General
The truck must be used, operated and serviced in accordance with the present
instructions. All other types of use are beyond its scope of application and may result
in damage to personnel, the industrial truck or property.
2 Correct application
NOTE
The maximum load and load distance are indicated on the capacity plate and must
not be exceeded.
The load must rest on the load handler or be lifted by an attachment approved by the
manufacturer.
The load must be fully raised,see "Lifting, transporting and depositing loads" on
page 113.
The following operations are in accordance with regulations and are permitted:
– Lifting and lowering loads.
– Transporting lowered loads over short distances.
– Occasional towing of trailer loads.
– When towing trailers the load must be secured on the trailer.
– The permissible trailer load must not be exceeded.
The following operations are prohibited:
– Travelling with a raised load (>30 cm).
– Carrying and lifting passengers.
– Pushing or pulling loads.
– Transporting hanging loads. If the truck is to be operated with hanging loads, proof
of sufficient safety distance under local operating conditions must be obtained from
a specialist assessor.
To Next Page
Loading...
Need help?
General
