173
11.14 EN
4.8 Checking the wheel attachments.
WARNING!
Using different tyres can cause accidents
The quality of tyres affects the stability and performance of the truck.
X
The diameter of the wheels must differ by no more than 15 mm.
X
Always replace tyres in pairs. After replacing the tyres check the wheel nuts are
secure after 10 service hours.
X
Always use tyres of the same make, model and profile.
Checking the wheel attachment
Requirements
– Prepare the truck for maintenance and
repairs (see "Tyre type" on page 33).
Tools and Material Required
– Torque wrench
Procedure
• Torque the wheel nuts (233) crosswise with
a torque wrench, for torques see "Tyre
type" on page 33.
The wheel attachment is now checked.
Z When using pneumatic tyres check the air pressure, for the air pressure see
"Parking the truck securely" on page 103
To Next Page
Loading...
Need help?
General
